Computer Assembly

DISASSEMBLE

1. The first thing that you need to do is open the computer case.
2. Once opened, you extract the drivers, first you'll remove CD-Rom drive.
3. Remove the floppy disk drive.
4. You'll extract the hard drive and all the drives, also the cables connected each component to the motherboard.
5. You'll remove the ramp by opening  the clips that secure the RAM into the Motherboard up.
6. You'll remove the Wireless Internet Card.
7. You disconnect the Microprocessor Fan.
8. Release the microprocessor.
9. Lastly, you disconnect the cables and remove the Motherboard.

REASSEMBLE

1. You install and  secure the motherboard.
2. You connect  the various cables.
3. You lay microprocessor back into its place.
4. Attach the Microprocessor Fan.
5. Connect the Wireless Internet Card to the Motherboard.
6. You insert and lock RAM into its slot on the Motherboard.
7. Connect the hard drive and its cables.
8. Then put the floppy disk card and connect its cables.
9. Put  the CD-ROM.
10. Lastly, Close the Computer Case.

DIAGRAM